Suction Cup Wooden Cat Bed Assembly Guide
Follow the steps below to safely mount your suction-cup wooden cat bed on the window. Assembly takes about 5 minutes and requires no tools.
Before you start
- Mount the bed onto a smooth, clean glass surface ; the suction cups will not hold on frosted, textured or dirty surfaces.
- Load capacity up to 12 kg.
- Before first use, make sure all suction cups are fully seated.
Assembly steps
- Clean the surface. Wipe the glass with a damp cloth, then dry it thoroughly. No dust, grease or moisture should remain on the surface.
- Lightly moisten the suction cups. Moistening the inner surface strengthens the grip (optional).
- Position the bed. Set it at your desired height and press the suction cups firmly onto the glass.
- Close the locking levers. Fix the vacuum by pressing down the lever on each suction cup.
- Test the hold. Gently pull the bed downward to check it holds firm; if there is any movement, clean the surface again and repeat the process.
Care and safety
- Check the suction cups’ grip once a week .
- Hand-wash the cushion in warm water; wipe the wooden part with a damp cloth and do not submerge it in water.
- Prolonged direct sunlight may lighten the wood’s colour over time.
For questions, reach us from our Contact page.